- Server
- Components
- Carbon Fibre
- Analog to digital conversion chip
- power management IC
- storage
- H3C router
- H3C server
- Inspur server
- hard disk
- HART Loop Converter Analog Input
- reader
- Ethernet module
- EDGE Guardmaster
- MAT Guardmaster
- MatGuard Mat Manager
- relay
- power control
- switch
- servo drive
- I/O module
- Bridge connector (jumper plug)
- Human Machine Interface (HMI)
- power monitor
- 1420 power monitor
- 1411 current transformer
- socket
- system
- electric relay
- frequency converter
- Install the GND connector on the board
- transceiver
- Module Option Card
- module
0102030405
SF95D-16
product detail
Ports and Performance
16 × 10/100BASE-TX electrical port, automatic negotiation rate with MDI/MDI-X
Switching capacity of 3.2 Gbps, packet forwarding rate of 2.38 Mpps (64 B)
MAC address table 8 K, cache 2 Mbit, support 9216 B jumbo frames
2. Plug and play function
Pure hardware forwarding, no configuration required
Built in loop detection, cable diagnosis, broadcast storm suppression
Hardware QoS based on 802.1p (4 queues, priority+weighted polling)
3. Mute and energy-saving
Fanless natural heat dissipation, operating noise 0 dB
Supports IEEE 802.3az EEE, with a typical power consumption of about 6 W and an annual power consumption of less than 55 kWh
4. Appearance and installation
Metal desktop shell, size 160 × 90 × 43.5 mm, weight 0.45 kg
Comes with an external 12V/1A power adapter, supporting Kensington lock hole anti-theft
Can be placed on a desktop or wall mounted, without 19 inch rack ear tabs
5. Environment and reliability
Working temperature 0-40 ℃, humidity 10% -90% (non condensing)
By obtaining CCC, CE, and FCC certifications, you can enjoy Cisco's limited lifetime hardware warranty