- Server
- Components
- Carbon Fibre
- Analog to digital conversion chip
- power management IC
- storage
- H3C router
- H3C server
- Inspur server
- hard disk
- HART Loop Converter Analog Input
- reader
- Ethernet module
- EDGE Guardmaster
- MAT Guardmaster
- MatGuard Mat Manager
- relay
- power control
- switch
- servo drive
- I/O module
- Bridge connector (jumper plug)
- Human Machine Interface (HMI)
- power monitor
- 1420 power monitor
- 1411 current transformer
- socket
- system
- electric relay
- frequency converter
- Install the GND connector on the board
- transceiver
- Module Option Card
- module
0102030405
NF5280M6
product detail
processor performance
Supports 2 third-generation Intel chips ? xeon ? Scalable processor (Ice Lake)
A single CPU can support up to 40 cores and 80 threads, with a maximum clock speed of 3.6GHz
Supports TDP up to 270W, with 3 UPI interconnect links (11.2GT/s)
2. Memory configuration
Supports 32 DDR4 ECC RDIMM/LRDIMM memories
The maximum memory capacity can reach 4TB
Support Intel ? Aoteng ? Persistent Memory (DCPMM), with a maximum capacity of 512GB per line, ensuring data is not lost during power outages
3. Storage capacity
Pre support:
Up to 24 2.5 "SATA/SAS/NVMe hot swappable hard drives
Or 12 3.5 "SATA/SAS/NVMe hot swappable hard drives
Rear support for multiple hard drive configurations (such as 4 2.5 "or 3.5" hard drives)
Built in support for 2 M.2 SSDs and 2 TF cards (for BIOS and BMC respectively)
4. Network and Expansion
Supports OCP 3.0 network card module, providing 10G/25G/40G/100G/200G network interfaces
Onboard dual 10 Gigabit Ethernet ports (10GbE)
Supports up to 11 PCIe expansion slots, including GPU, FPGA, RAID cards, etc
Supports up to 4 dual width GPUs or 8 single width GPUs, suitable for AI inference and training scenarios
5. Management and reliability
Support IPMI remote management with independent management network port
Support remote power on/off, virtual media, firmware updates, fault diagnosis, and other functions
Intelligent temperature control and air cooling system ensure stable operation of the system
Fully redundant power supply design (550W~2000W), supporting hot swapping
Tool free maintenance design, simplifying the operation and maintenance process