- Server
- Components
- Carbon Fibre
- Analog to digital conversion chip
- power management IC
- storage
- H3C router
- H3C server
- Inspur server
- hard disk
- HART Loop Converter Analog Input
- reader
- Ethernet module
- EDGE Guardmaster
- MAT Guardmaster
- MatGuard Mat Manager
- relay
- power control
- switch
- servo drive
- I/O module
- Bridge connector (jumper plug)
- Human Machine Interface (HMI)
- power monitor
- 1420 power monitor
- 1411 current transformer
- socket
- system
- electric relay
- frequency converter
- Install the GND connector on the board
- transceiver
- Module Option Card
- module
0102030405
Allen-Bradley Bulletin 56RF RFID Transceiver
product detail
Project specifications
Operating frequency 13.56 MHz ± 7 kHz
Standard protocol ISO 15693/ISO 18000-3 Mode 1
Label compatibility with ICODE SLI, SL2 series and other manufacturer labels that comply with ISO 15693
Communication interface RS-485 half duplex (9600/19200/38400/115 200 bps)
Supply voltage 24 V DC (20... 30 V DC)
Current consumption ≤ 100 mA @ 24 V DC
Data rate 26.48 kbit/s (RF air)
Recommended read/write distance is 30-100 mm; maximum 168 mm (depending on label size)
Cable length from interface module ≤ 91.4 m (300 ft)
Shell form ? 40 × 40 mm square
Housing rating IP67 (optional IP69K), -25...+70 ° C operating temperature
M12 4-pin male connector (24V, GND, RS-485 ±)
Dual color LED status indicator (power/communication/read-write/fault)
Anti vibration/anti impact 10 g @ 10... 500 Hz/50 g impact