- Server
- Components
- Carbon Fibre
- Analog to digital conversion chip
- power management IC
- storage
- H3C router
- H3C server
- Inspur server
- hard disk
- HART Loop Converter Analog Input
- reader
- Ethernet module
- EDGE Guardmaster
- MAT Guardmaster
- MatGuard Mat Manager
- relay
- power control
- switch
- servo drive
- I/O module
- Bridge connector (jumper plug)
- Human Machine Interface (HMI)
- power monitor
- 1420 power monitor
- 1411 current transformer
- socket
- system
- electric relay
- frequency converter
- Install the GND connector on the board
- transceiver
- Module Option Card
- module
0102030405
1783-USP1S4T Stratix 2100 Unmanaged Ethernet Switch
product detail
Port configuration
4 × 10/100 M RJ45 (IEEE 802.3/802.3u, MDI/MDI-X adaptive)
1 × 100 M SFP slot, supporting LC multimode/single-mode fiber modules, with a maximum distance of 30 km
performance
Full line speed non blocking switching capacity of 1.0 Gbps, packet forwarding rate of 0.74 Mpps
By default, QoS (802.1p) and broadcast storm suppression are enabled to ensure priority forwarding of real-time EtherNet/IP data
Power supply and power consumption
Single channel 12... 48 V DC terminal power supply, typical power consumption 2 W, maximum 3 W
Support reverse connection, surge and short circuit protection; Power loss alarm relay output (normally open/normally closed 24 V/1 A)
Industrial-grade design
IP30 metal casing, DIN rail or panel installation; Anti vibration 5g, anti impact 50g
Working temperature -40...+75 ° C, 5... 95% no condensation, altitude 4000 m without derating
Passed CE, UL, ATEX Zone 2, IECEx and China CCC explosion-proof certification
Plug and Play
Zero configuration online, port status LED is clear at a glance
Integrate configuration files with Studio 5000 to automatically identify topology, facilitating quick acceptance and maintenance“